The eyeglass frames come with so-called DEMO lenses, which are NOT suitable for optical or safety use or normal wear.
The special helmet temple is designed for use with a motorcycle helmet. The glasses with the helmet temple are not suitable for wearing without a helmet. For this purpose, please use the street temples.
For proper functioning of the helmet temple, a correctly sized and good quality motorcycle helmet is required.
To change the temples, press the locking pin on the inside of the connector while pulling out the temple. To insert, simply push the end of the temple into the connector until the pin clicks into place.
The temples are marked with "R" (Right) and "L" (Left) on the inner side. Pay special attention to this when using the helmet temple. The grooves should always face outward and the "wing" should face upward, as shown in the product images.
The frame comes with a CAT 3 (9-18% light transmission) grey polarized sun clip-on lens. It is recommended for use in strong sunlight. Do NOT use it in low visibility conditions. For that purpose, a yellow lens is recommended.
The Clip-On attaches magnetically to the front of the glasses. Simply place it on the frame and release.
Only the recommended compatible Clip-On models can be used with a given eyeglass frame.
