MOTOEYE paper display 12 slots

Instructions for MOTOEYE Paper Display

VIDEO

Package Contents:

• Base box 1pc
• Vertical back panel 1pc
• Vertical support 2pcs

1. Fold the vertical supports along the fold line.
2. Insert one, then the other vertical support into the back panel with the red side facing upwards. Make sure that the right and left sides are not interchangeable. The position of the tabs indicates this. First insert half of the tabs into the slots, then the rest until they touch, one after the other.
3. Open the base box on both short sides using the folding tabs. Be careful not to tear it. It is recommended to use a letter opener.
4. Insert the tabs of the vertical back panel into the openings of the base box, but only halfway. Start with one of the side tabs and work towards the middle, then flip and repeat from the opposite side.
5. Once all 6 tabs are halfway into the openings, use one hand to support the panel inside the box, and with the other hand, push the tabs in until they touch.
6. Close the ends of the box by folding back the extended tabs.
7. There are two notches on the base box in front of the vertical back panel. If desired, you can insert stems suitable for helmet wear into these. The stems are not included in the package.